Physical Properties
Type: Hybrid layer and White Material: 5Y-TZP + 3Y-TZPStrength: 1050 ± 150 MPa cervical
Indications
Veneers, Inlays, Onlays, anatomically reduced crown, fully anatomical (monolithic) crown front tooth, fully anatomical (monolithic) crown posterior tooth, anatomically reduced bridge (up to 3 units), Anatomically reduced bridge (up to 14 units), Fully anatomical (monolithic) bridge (up to 3 units), Fully anatomical (monolithic) bridge (up to 14 units), and Hybrid abutment crown.
Color according to VITA® and, if necessary, universal colors: Stellar White, OM2, OM3, A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4.
Hybrid layer - 5Y/3Y multicolored zirconia
Nacera® Pearl Natural zirconia gives all constructions – from single crowns to large fully anatomical implant-supported restorations – a lifelike character, as the natural color gradient and translucency of the teeth are revealed in natural transitions after sintering. 16 shades, two bleach shades according to the VITA® shade guide and a specially developed bleach shade cover all common tooth shades and meet the highest esthetic demands.
Perfectly suitable for:
All indications: from monolithic single crowns to complex superstructures for the anterior and posterior region.
Solders and Fluxes
Design the soldering patty as small as possible and preheat it in the furnace at approximately 600°C/1112°F. The soldering gap should be the same thickness as the soldering strip. Allow the object to cool slowly after soldering. Use flux very sparingly.
Pre-Solder
HGPKF 1015Y, High-Fusing Bondal Flux
Post-Solder
.615, .585 Fine Gold Solder, Bondal Flux
Laser weld material
Laser Ceramic Yellow PdF
Polishing
After glazing remove oxide and flux residue and finish/polish the framework with rubber finishers/polishers.
Indications
Onlays, 3/4 crowns, crowns, telescope crowns, conus crowns, posts, short and long span bridges, bars, attachments, implant superstructures, partial dentures.
Contraindications
For patients with known allergy/sensitivity to any major or minor constituents of this alloy, consultation with a physician is recommended.
Side Effects
In individual cases, sensitivity, or allergies to components of this alloy may occur.
Interactions
Galvanic effects may occur between different alloys in the same oral environment.
